Design Guide to Eliminate Binding in Parallel Linear Guides webinar

By Lisa Rosen | July 31, 2018

This webinar was presented on Tuesday, September 11, 2018. Click below to watch on demand.

Equipment builders often struggle with binding issues during the installation and alignment of linear guides when assembling parallel configurations. Extra care and precision in the preparation of mounting structures and mounting surfaces is required to prevent binding during assembly. Additional attention can result in schedule delays and cost overruns when unexpected problems occur.

Guide wheel based linear bearings with crowned running surface are designed to accommodate misalignment in parallel configurations of the linear guide rails and can be quickly assembled onto less accurately prepared mounting structures without binding. Several mounting orientations are possible and new product additions provide flexibility for a variety of equipment applications. This webinar is a design guide to eliminate binding in linear bearings.

By attending this webinar, you will learn:

Featured Speakers:

Brian BurkeSenior Product ManagerBishop-Wisecarver Group

Miles BudimirSenior EditorDesign World

Sponsored by: